• Home
  • The Best EL84 Power Tubes - www.thetubestore.com

The Best EL84 / 6BQ5 / 7189 Power Tubes - Reviews and Guide

Are you looking for the very best EL84 / 6BQ5 power tubes for your vacuum tube amplifier? This is the place to start. Check out the following tube reviews for guidance in getting the best possible tone out of your tube amp.

There are not many substitutes or alternative names. You will frequently find that most brands call them EL84. The American version is called 6BQ5. There is a slightly higher power version called the 7189 and 7189A tube. All are compatible with one another in most cases.

The EL84 power tube was released in the early 1950's and originally intended for use as an inexpensive alternative to the larger power tubes of the time. Shortly afterward there was a large selection of stereo hifi tube amplifiers using them (Dynaco, Eico, Mullard, and Fisher) In that same time, Vox began using the EL84 power tube as well. Vox built their incredibly popular stable of guitar tube amps based around EL84 vacuum tubes and has never looked back. The "Vox" sound from an AC15 or AC30 is in large part due to the EL84 power tubes

If you're not sure if your tubes are bad, we have some great trouble-shooting tips to help you find out. You won't need a tube tester either, so you can try these suggestions right at home. You'll find more info in our blog article, "How To Tell If Your Tube Is Bad".

(View our complete selection of EL84 / 6BQ5 vacuum tubes)

Review Notes - how we conducted the review
Full reviews of the tubes we tested (click to go to its review):
Preferred Series 7189 (premium EL84)
Preferred Series EL84 (6BQ5)
Gold Lion EL84
Mullard EL84
Electro Harmonix EL84
Reflector 6p14p/EL84
Sovtek EL84
Telam and Polam EL84
Tung-Sol EL84
Tung-Sol 7189
JJ EL84
JJ EL844 (low power EL84 version)


Review Notes


Tube reviews written by John Templeton

For these tests I was lucky enough to secure the loan of some classic amps and some modern gear as well. The test amps used in this round included:
1961 VOX AC30 – No top boost
Mid 60’s VOX AC10 – Twin
Fender Blues Junior
Fender Pro Junior

All of these amps are combos and put maximum stress on power tubes when it comes to physical vibration and heat build up. The VOX AC30 should have a health warning for tubes since I have yet to encounter a harsher environment to operate in. On with the show.

There has not been a lot of space devoted to this tube in the past. The main reason was that current production provided a limited selection. Let’s forget about New Old Stock for the time being. They’re out there, they are expensive and sometimes represent the dregs of production.

Back to top

The Complete Reviews

Preferred Series 7189 (premium EL84) - This is the tube you want in just about every amp that calls for a 7189 or EL84. These tubes are bold, producing solid fundamental notes and shimmering harmonics. Don’t confuse these with any other EL84 on the market. These are Russian tubes built for Russia. To get the 7189 designation you build a tube that will handle both higher plate voltages and increased current. To handle those issues the glass has to be just as heavy duty.

If you are running older cathode biased amplifiers these tubes are about as good a choice as you can make for this kind of money. Many hours of testing in class A single ended amps and demanding push – pull circuits; such as the AC30, show it to be the way to go if your amp likes to eat tubes.

This tube is not fancy. It’s great sounding and well constructed for “professional” use. To qualify as a Select Series tube, thetubestore.com performs a full battery of tests and extra inspection to make sure you never receive a dud. The $$/tone ratio is excellent with this tube.

Back to top

Preferred Series EL84 (6BQ5) - A warmer, fatter sounding alternative to the now venerable JJ EL84, the Preferred Series EL84 tube is a versatile option that is quiet and resistant to microphonics. In a small combo amp there is no discernable mechanical noise even with the volume dimed.

These tubes fall somewhere between the darker and vintage voiced Mullard EL84 vacuum tube and the chimy JJ EL84 tonally, with extended bass response, sparkling highs and creamy overdrive characteristics. Despite this, there is no lack of headroom for those who like to keep things clean. These are a great "goldilocks" EL84. Not too much of anything, and just the right amount of everything.

Back to top

Gold Lion EL84 - All tubes in the EL84 family are tested in a cathode biased amp where they are really pushed and their harmonic content blooms. The Gold Lion's just sound great at any volume level. The plates look to have a different coating than anything else coming out of new sensor in EL84's and this, combined with a heavy gage crimped plate seems to really keep the noise down.

Clean tones are chimey and sparkling with single coil pickups and a bit darker with humbuckers. The overdrive on these tubes is smoooth. No gritty, raspy tones, the tubes have just the right amount of compression to track with the overdrive and keep it beautifully controlled while blooming nicely as the note fades out. This produces a very nice organic sustain.

I would take these over MOST NOS tubes any day of the week. If you figure in the extra cost of NOS, these are actually a better value. IF you can get Philips, Telefunken, or British Mullard then go for it. If not, try a set of the Gold Lion EL84's.

Back to top

Mullard EL84 - Blues guys will go crazy for the reissue Mullard EL84 vacuum tube. It has the least clean headroom and can be pushed into distortion with aggressive playing. When pushed into distortion the Mullard EL84 tube has a softer, creamier overdrive that is more musical than other EL84 tubes and is the tube to pick if you want dirt.

Back to top

Electro Harmonix EL84-EH - For most applications this is a good bet. The sound of these EL84 tubes is very smooth when biased correctly. Tonally, it’s hard to go wrong. They are pleasant to listen to and have the creamy overdrive most people look for in an EL84. The Electro Harmonix EL84 tubes have a nice chime but it’s not overbearing. It looks a lot like the standard Sovtek but a closer inspection will reveal differences. The plate looks a bit more polished with a different coating and internally they feature precisely wrapped grid wires with a bright metal shine. The only problem with this tube is that like the Sovtek and TAD product, they are tubby. The fattest one I measured was .886 inches thick against the G.E. maximum width spec of .875 inches. For most purchasers this will not be an issue. If you have an amp that requires the tube to pass through a hole in the chassis before the pins seat in the socket you should measure the diameter of that hole. If you’re still unsure, the JJ EL84 is the closest in dimensional specs to NOS measurements and the G.E. standards for the 6BQ5.

Back to top

Reflector 6p14p / EL84 - I imagine this tube was used all across the former Soviet Union. The Reflector company produced these back in the day as part of a series of miniature pentodes. While the West was using the 6BQ5/EL84, 7189 and 7189A the Reflector plant in Russia was producing the 6p14p, 6p14p-V and the 6p14p-EV. This tube really surprised me. I had them running in my test amp for an hour at full power and they didn’t get any hot spots on the plates and remained low noise. I don’t find these to be as chimey as the JJ EL84 but brighter than the Sovtek 6BQ5. A good Russian EL84, my sample has their typical rugged build. Big plates and nice micas. Overall I’d call them warm with really nice mid-range response. Really great for blues tone when clean or overdriven. The overdriven sound comes on gradually but breakup can be coaxed out at lower volumes if you dig in with a pick or use hotter pickups. These would be great replacements for your vintage radio as well. Equipment of that sort would have been a primary destination for these tubes back in the day.

Back to top

Sovtek EL84 - The Sovtek EL84 has been a staple for Fender, Boogie, Crate, Peavey and other manufacturers of tube amps using the ’84. This tube really is a good value. It is predictable, reliable and affordable. You can get good EL84 tone at a reasonable price. The Sovtek EL84 has been around a long time, and it has shown continuous improvement over the years. Using a matched set of properly biased tubes will yield a clear smooth sound that is fairly warm and transitions into a smooth breakup with that singing tone that EL84’s are known for. In cathode biased amps like the VOX they get a premium workout and will suffer some effects from heating and cooling. Being prone to mechanical noise in a combo amp, the EL84 is not recommended for amps with poor air circulation. The heating/cooling cycle inside an AC30 easy-bake oven seems to loosen up the mechanical structures within the tube causing them to become very noisy (mechanically) with time. This is true of any amp that uses an EL84 in a poorly ventilated chassis/cabinet arrangement, so if this is your rig, go for the JJ or Russian EL84M.

In the Fender Blues Junior the tubes can really put out respectable volume and great tone for all types of music. The highs are not harsh, the mids are warm and the bottom end is not lacking. If you want to really scream try a Pro Junior with full volume. Very crunchy yet smooth with great singing sustain. I personally like my tubes biased at 60% or 70% of static dissipation and the Sovtek EL84 performed well in this range.

Back to top

Telam and Polam EL84 - Two wild and crazy tubes! I think for single coil guitars they are the best sounding tubes available. Fender amps love them. Pro Junior, Blues Junior two thumbs up. Mesa Boogie, VOX, Dr Z another two thumbs up. The midrange is very rich in harmonic content. JJ’s sound flat and one dimensional by comparison. The great mids transition into a smooth clear treble and the bass frequencies are solid with no flabbiness. I had a couple of players testing them and they had no problem in picking these tubes as their favorites. Numerous tube swaps were done and the boys would always be able to tell if Polam or Telam were installed.

From a construction standpoint there is more good news. They seem to have stayed very close to the original bottle specification. A lesson that a lot of tube makers have not learned. I’m convinced that the Telam and Polam tubes are out of the same factory. The bottles are the same, the spacers, pins and internal connections all look the same. The only difference is in the stamping of the plate. Telam has a ribbed plate that is spot welded while Polam has a smooth plate that is crimped. The coating on both looks identical. Microphonics or mechanical noise doesn’t seem to care about the construction methods as both are excellent. Picking one over the other is difficult because they sound so much alike. Both tubes sound great clean and both have a beautiful natural overdrive sound with bite and a good aggressive sound.

Back to top

Tungsol 7189 - The EL84/6BQ5 is an amazing audio tube. It was designed to work in many applications but not for very high voltages. These tubes are happy when provided plate voltages are in the 300 volt range. To reach their rated output of 12 watts they generally run with high current and get hot. To deal with conditions where higher voltage and current are required, an improved series of these miniature pentodes was developed. The EL84/6BQ5, 7189 and 7189A. These were designed for plate voltages of 300, 400 and 400+ respectively.
The Tung Sol 7189 can be operated at higher plate voltage and produce more power than a standard EL84. According to the book it can handle 400 volts and 12+ watts without developing hot spots. My tests seem to back this up. VOX owners will want this tube on their wish list. It’s rugged and can take the very high current that the VOX and similar cathode biased amp subject them to. The tube uses heavy glass and very heavy micas. A pair of cooling fins have been added to the support rods to assist with cooling.
All the tone you expect from the EL84 is there in the 7189. Chime and sparkle at lower volumes but when you crank it up these things scream. I ran a set of these in a 22 watt cathode biased amp with a separate single 12” cab. These 7189 tubes can get tone ranging from The Edge to Keith Richards. The driven tone is great.

Back to top

Tungsol EL84 / 6BQ5 - Combine the rugged build quality you find in Sovtek and the sweet tone you get from JJ and you’ll get a good idea what these EL84 tubes are all about. Structurally, they have the same bottles used in Sovtek, EH, and Mullard EL84 tubes. Thick glass, a bit on the tubby side, with nicely finished pins and rugged spacers. The getter design is different from all the other New Sensor tubes. Instead of a small cup these tubes have a single halo type getter up top. The plate coating is also different, having a dark burnished charcoal look. The screening is clearly applied. Overall they look very nice. If your amp will use any of the New Sensor EL84’s the Tungsol EL84 tube will fit just fine. Sonically, I compared the Tung-Sol EL84 power tubes with current offerings from New Sensor and the Tube Store Preferred series 7189 tubes. They sound very punchy and have lots of gain. The sound was more articulate than anything from Sovtek, EH or Mullard and was very similar to the Preferred Series 7189. I haven’t tried them in hi-fi equipment but I’m very confident they will be a hit in the audio community based on my guitar amp testing. Very low noise floor and no mechanical noise. Great crunch is easily achieved with a humbucker equipped guitar, while the sparkle shines through with single coils. When pushed into clipping these tubes just give off amazing harmonics and allow you to access some great, controlled feedback. I’m sold! The manufacturer claims the Tung Sol tubes are the best thing for VOX AC30 amps and I have to agree. Testing in my own cathode biased amp confirmed their statements. My amp eats lesser tubes from Russia and many NOS offerings, but the Tungsol EL84 tubes hung in. Not a hint of hot spots or red plating and no trace of mechanical noise or microphonics.

Back to top

JJ EL84 - This tube has been a personal favorite of mine so the review is not entirely unbiased. With the JJ EL84 tube you seem to get a compromise between tone and reliability. Nice mids, sparkling highs and solid bottom end characterize this tube. From a construction standpoint I think JJ EL84 vacuum tube has hit the mark. As with any EL84 they can be prone to mechanical noise in combo amps. However, they seem to take the heat and vibration in stride without any negative tonal effects. In the AC30 the JJ tubes really delivered the VOX chime with lots of swirl and shimmery harmonic content. In the little Pro Junior just crank it up and you get a great, nasty, overdriven sound. That’s not bad, it’s good. When pushed hard into the land of the square wave they remind me a lot of a good 6V6. If you have tried the OEM Sovtek’s that shipped in your amp it’s worth your time to try a set of JJ EL84 tubes. Many convert and never go back. In cathode biased amps you can generally plug and play for that hot creamy “woman tone” that so many desire.

Back to top

JJ EL844 (low power EL84 version) - I used a stock Fender Pro Junior to test these tubes. When switching between tubes no bias adjustments were made. This was a plug and play test and done this way because I figured most people would likely drop them in and see what happens. The EL844 does exactly what the manufacturer claims. You get all the tone of an EL84 with less volume overall. The difference doesn’t end there. Because the tube has less power to give, you end up with very nice distortion at lower volumes. I ran the Pro Jr. up to a point just at the start of audible breakup. With EL84’s, the Fender Pro Jr. was loud and punchy. Switch to the EL844’s and cool stuff starts to happen. At the same settings the distortion was now very nice. The EL844 adds a bit of compression so the distortion was smoother and more focused. These tubes have excellent response to pick attack. With a lighter touch you can get sparkling shimmer, dig in with the pick and you can push the tubes into overdrive. This characteristic is one of the highlights of the tube. I’ve used many amps with a low power switch and even on my own designs I don’t find it really useful or toneful. The JJ EL844 accomplishes the task very nicely. You can now get your AC30 to deliver the tone you want at a volume you can live with. And don’t be mistaken. Any situation that your EL84 equipped amp could tackle should be no problem for the EL844 equipped amp. What you gain is a very sweet overdriven tone that you can control from your guitar and a natural compression that firms up the tone as you dig deeper into overdriven sounds.

Back to top