Multi-Capacitor PC Board
Requires capacitors with lead spacing of 5mm, and a maximum diameter of 13mm.
This DIY product is aimed towards the more experienced builder with a basic understanding of tube design.
Additional Information and Downloads
User Instructions (PDF)
Download Adobe Acrobat PDF reader
Warranty Information and Return PolicyWarranty Period: 3 months
All our tubes are guaranteed for 3 months from the date of purchase. (Any exceptions will be noted on that tube's Warranty tab)
If you receive a tube that does not perform to the manufacturer's specifications, please do the following:
- contact us to get a return authorization
- return it via regular mail within 90 days from when we shipped it, and we will provide an exchange or refund of the full purchase price of the tube.
Returns not related to warranty or defect will be considered at our discretion, and are subject to a 15% restocking fee.
We can not accept returns that don't have an authorization, are past 3 month, or are returned improperly.
These guidelines may be updated without notice.
Ratings & Reviews
Backward Board Layout
by mdg -
I purchased the Rev B version M2 Multicap board set to replace the multi-caps in a Model 528 amplifier in a 1953 Wurlitzer Jukebox. The chassis holes in the amp are somewhat octagonal, measuring 7/8-in wide across to opposite longer sides, and just shy of an inch across to the shorter (corner) sides. The Multicap board would have worked well, except it is backwards. The ground (negative) connections would be better placed around the outer edge of the board, with the positives on the inner circle, just as they are in a multi-cap. As it is, the chassis holes are too small to use these boards without some modification - i. e. cutting the connecting ground traces to enable the inner connections to be the positives.